Electrolux EWX1237 Instruction Booklet page 31

Problem
• The door will not open:
• Spinning starts late or the
laundry is not spun enough:
• The machine will not dry or the
laundry is not dry enough
If you are unable to identify or solve the problem,
contact our service centre. Before telephoning, make
a note of the model, serial number and purchase
date of your machine: the Service Centre will require
this information.
Possible cause
• The water level is above the bottom edge of the door.
• The machine is heating the water or drying clothes.
• The drum is turning.
• The electronic unbalance detection device has cut
in because the laundry is not evenly distributed in
the drum. The laundry is redistributed by reverse
rotation of the drum. This may happen several
times before the unbalance disappears and normal
spinning can resume. If, after few minutes, the
laundry is still not evenly distributed in the drum,
the machine will spin at a lower speed. If at the
end of the programme the laundry is not spun
enough, redistribute the load manually and select
the spin programme.
• The water tap is closed (E10).
• The drain filter is clogged (E20).
• The drying time has not been selected.
• An appropriate drying time or drying programme
has not been chosen.
• There is too much laundry inside the appliance.
31