MSI RG54G2 User Manual page 54

6. Basic Rate: The default rate is Default. The Basic
Rate is not the same as the Transmission Rate, but a
series of rates that the router broadcasts to clients to
make them aware of over what rate they can transmit.
With Default Basic Rate, the router will broadcast that
it will automatically transmit at the best rate. You can
also select another option (1,2,5.5,11,6,12,24Mbps) to
broadcast only slower rate available.
7. Transmit Rate: The default rate is Auto. With the
default setting, your router will enable Auto-Fallback
feature and automatically select the best possible data
rate for transmission. From the pull-down menu, a
range of other fixed transmission rates are also
selectable.
8. PRISM Nitro
Nitro mode should improve your network
TM
performance, either 3 times faster data rates in mixed
environment where both 11g and 11b clients exist, or
50% more data throughput in 11g-only environment.
Click Apply to save the setting, or Cancel to cancel the changes.
> Authentication & Encryption
This feature enables you to manage your wireless network secu-
rity with different authentication and encryption methods.
Authentication
Open or shared key
Shared key
WPA
802.1x
: The default is Disable. Enabling this
TM
Encryption
None
WEP-64 bits
WEP-128 bits
WEP-64 bits
WEP-128 bits
TKIP
None
WEP-64 bits
WEP-128 bits
49
WEP key 1~4
Not required
10 hex
26 hex
10 hex
26 hex
Not required
Not required
10 hex
26 hex