3. To build up wired Internet
connection, plug one end of
another Ethernet cable to the
LAN port (1~4) of RG54G2,
and the other end to your
computers. It does not matter
which numbered LAN port is
chosen.
4. Power on your Cable/DSL modem by turning on power
switch or re-connecting its power adapter.
5. Power up the RG54G2 by plugging the DC end of
power adapter into the power receptor of RG54G2 and
the AC end to an electrical outlet.
6. Verify LEDs on the top panel light up to indicate
proper connection:
-
Power LED should be ON to show power
connection
-
WAN LED should be ON if your modem is
correctly connected to the router.
-
LAN 1~4 LED should be ON correspondent to
the numbered ports your computers are
connecting to.
15