Clock Functions - Electrolux EBSL7 User Manual

2. Start the oven with the On/Off control
.
3. Use
or control to select the
menu option Cleaning Menu .
4. Confirm with
5. Use
or control to select the
menu option Full Steam .
6. Confirm with
7. Use
or to set temperature.
8. Use
to set the DURATION function
or END
or switch-off time with
The first steam shows after approximate-
ly 2 minutes. When the oven reaches
set temperature an acoustic signal
sounds.
Another acoustic signal sounds at the
end of cooking time.

CLOCK FUNCTIONS

Clock functions
Symbol Function
Minute Minder
Duration
End Time
You can use Duration and End Time at
the same time, if the appliance is to ac-
tivated and deactivated automatically
later.
If you set the time for a clock function, the
time starts to count down after 5 seconds.
Setting the clock functions
1. Activate the appliance. Set the heating
function and, if necessary, the tempera-
ture.
2. Touch
again and again until the dis-
play shows the necessary clock function
and the related symbol.
3. Touch + or - to set the necessary time.
Touch OK to confirm.
When the appliance operates at the set
time, an acoustic signal sounds. The ap-
pliance deactivates. The display shows
a message.
4. Touch a sensor field to stop the signals.
.
.
. Set the cooking time
or .
To set a countdown (max 2 hours 30 minutes). This function
has no effect on the operation of the appliance.
To set how long the appliance has to be in operation (max. 23 h
59 min).
To set the switch-off time for an oven function (max. 23 h 59 min).
9. Stop the signal and the oven with the On/
Off control .
After the oven cools down, soak up all re-
maining water from the steam generator
with the Quick Sponge and clean if it is nec-
essary with some vinegar.
Let the oven dry fully with the open door.
Half Steam + Heat and Quarter Steam +
Heat
The continual change from fan to steam
takes place automatically, with Half Steam
+ Heat .
To set Half Steam + Heat and Quarter
Steam + Heat function use the same proce-
dure as for Full Steam .
Description
With the Minute Minder you must acti-
vate the appliance to set the clock func-
tion. You do not have to set a heating
function.
With the Duration and End Time , after
90 % of the set time, an acoustic signal
sounds. The appliance deactivates.
The appliance uses the residual heat to
continue the cooking process until the
time is completed (3-20 minutes).
When you use Meat Probe, Duration
and End Time do not work.
Time Extension
The Time Extension makes the oven func-
tion continue after the set time ends.
• Applicable for all oven functions with Du-
ration or Weight Automatic .
• Not applicable for oven functions with
Meatprobe .
electrolux 11