Mp3 Player; Usb Storage Devices - Philips HTL3120 User Manual

• HIGH: Spice up your dull movies and
music with added sound effects.
• CLEAr: Hear every detail in your music
and clear voices in your movies.
• dEEP: Experience spoken words and
music vocals in comfort.
• OWN: Personalize the sound based on
your preferences.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1
Press SURR to select a sound option from
the display panel.
• AUtO: Intelligently select the best
surround sound mode based on the
media played.
• OFF: Two-channel stereo sound. Ideal
for listening to music.
• SURR: Multi-channel surround output.
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of the SoundBar.
1
Press TREBLE +/- or BASS +/- to change
the frequency.
Auto volume
Turn the auto volume on to keep the volume
constant when you switch to a different source.
1
Press AUTO VOL to turn auto volume on
or off.
Synchronize picture and sound
If the audio and video are not synchronized,
delay the audio to match the video.
1
Press AUDIO SYNC +/- to synchronize
the audio with the video.
10 EN
Night mode
For quiet listening, decrease the volume of loud
sounds when audio is played. Night mode is
only available for Dolby Digital soundtracks.
1
Press NIGHT MODE to turn night mode
on or off.
Note
•
If auto volume is set to turned on, you cannot enable
the night mode.

MP3 player

Connect your MP3 player to play your audio
files or music.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1
Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO-IN
connector on your SoundBar.
2
Press AUDIO-IN on the remote control.
3
Press the buttons on the MP3 player to
select and play audio files or music.

USB storage devices

Enjoy audio on a USB storage device, such as an
MP3 player and USB flash memory, etc.
What you need
• A USB storage device that is formatted
for FAT file systems, and complies with the
Mass Storage Class.
• An MP3 or WMA file on a USB storage
device
1
Connect a USB storage device to the
SoundBar.
2
Press USB on the remote control.