Apply Factory Settings; Wall Mount - Philips HTL3120 User Manual
With integrated 120w subwoofer and bluetooth
Hide thumbs
Also See for HTL3120:
- Quick start manual (16 pages) ,
- User manual (16 pages) ,
- Quick manual (3 pages)
Table of Contents
Advertisement
•
no audio/video play from a connected
device.
Apply factory settings
You can reset your SoundBar to the default
settings programmed at the factory.
1
In AUX mode, within three seconds, press
VOL-, BASS-,and Treble-.
» When the factory settings restore is
complete, the SoundBar automatically
switches off and restarts.
EN
5 Wall mount
Note
•
Koninklijke Philips Electronics N.V. bears no
responsibility for improper wall mounting that results
in accident, injury or damage. If you have any query,
contact Philips Consumer Care in your country.
•
Before wall mounting, make sure the wall can support
the weight of your SoundBar.
•
Before wall mount, you need not remove the three
rubber feet at the bottom of the soundbar, otherwise
the rubber feet cannot be fixed back.
Screw length/diameter
Depending on the type of wall mounting your
SoundBar, make sure that you use screws of a
suitable length and diameter.
3.5-4mm
4mm
> 25mm
For information about how to wall mount your
SoundBar, see the quick start guide.
Page 12
- Quick Links:
- Night Mode
- Play Audio through Bluetooth
Hide quick links:
Advertisement
Table of Contents
