Getting Started; Auxiliary Audio Jack - Cobra SPX 5500 Important Information Manual

Installation
Your Detector
Dashboard Mounting
1.
Place the detector on the dashboard to find a location
where the unit has a clear, level view of the road.
The angle can NOT be adjusted after mounting.
2. Remove the paper backing
from one side of the hook-
and-loop fastener.
3. Attach the pad to the
dashboard at your chosen
location and remove the
other paper backing.
4. Attach the detector to the
hook-and-loop fastener.
You can remove and
reattach the unit as
often as you like.
5. Plug the power cord
into the detector.
6. Plug the cigarette lighter
adapter on the power
cord into your vehicle's
cigarette lighter.
English
4
Getting Started and

Auxiliary Audio Jack

Your Detector

Getting Started

Power On
Testing
System Ready
On-Off/
Volume Control
Rotate clockwise
(away from you)
To Turn On the Unit and Adjust the Audio Volume
Rotate the On-Off/
Tone
Volume control
Three beeps
clockwise (away
from you).
Start-Up Complete
Start-up is complete when the display continuously
h
shows the letters indicating the current user settings
c h
( = City mode, = Highway mode,
NOTE
In some vehicles, power is supplied to the cigarette lighter even while the ignition
is Off. If this is the case with your vehicle, you should turn Off or unplug your
detector when parking for lengthy periods.
Auxiliary Audio Jack
The Auxiliary Audio Jack can be used to connect external speakers in
environments with high ambient noise levels. The internal speaker will
be disconnected. (This uses a mini stereo audio connector.)
•
Voice
Visual Display
Testing, then The display will
three beeps cycle through and
show the user
System Ready
modes
i
= IntelliMute On)
•
Auxiliary
Audio Jack
Nothing Comes Close to a Cobra
®
5