Pyle PSTND13 Manual

Heavy duty steel double support bookshelf speaker stands

Download this manual

Thank you for purchasing the PSTND13. Use this pair of bookshelf speaker stands to keep your

speakers stable and secure. Heavy-duty steel construction looks great, conceals cables, and

optimizes the performance of your speaker by minimizing floor distortion. The columns can even be

sand-loaded to deaden resonance and increase stability. Adjustable spikes on bottom of stand

provide additional security. Maximum weight capacity: 35 lbs. Setup height: 13".

Your kit includes two (2) sets of the following items:

The following instructions are for the construction of one of your stands. To build the second stand,

simply follow the directions from the beginning again.

PSTND13

Heavy Duty Steel Double Support

Bookshelf Speaker Stands

http://www.pyleaudio.com

1 x large base plate

1 x speaker plate

2 x steel columns

2 x sticky-backed pads

4 x long black screws

4 x silver spikes

4 x silver nuts

4 x black nuts

8 x plastic stoppers

1 x Allen wrench

Note: your package may

include a different

amount of black and

silver nuts. They are the

same size and

interchangeable.

Page 1 Bookshelf Speaker Stands http://www.pyleaudio.com Thank you for purchasing the PSTND13. Use this pair of bookshelf speaker stands to keep your speakers stable and secure. Heavy-duty steel construction looks great, conceals cables, and optimizes the performance of your speaker by minimizing floor distortion. The columns can even be sand-loaded to deaden resonance and increase stability.
Page 2 1. Begin with the larger base plate. Insert two 3. Place a nut in the hex-holed plastic stopper (2) black screws through the underside of the and screw this whole structure each black plate. screw with the nut facing up, or away from the plate.
Page 3 4. Now, fit the two steel columns onto each 7. Take the complete top plate and fit it onto pole. You may need pliers to adjust the fit. the bottom plate. Again, you may need to adjust the fit with pliers. 5.
Page 4 9. Peel the protective paper off the back of the Product Specifications pads and stick them on the top of your stand. This will protect your speaker and help isolate  One Pair of Speaker Stand For A Bookshelf / sound from resonating in the stand.