Building The Appliance In Under A Worktop - AEG Electrolux ER6427T Installation And Instruction Manual

Building the appliance in under a
worktop
This appliance can also be built in under the worktop
of your kitchen unite. To do this, proceed as follows:
1. remove screws which secure the top to the front
hinges;
2. move the top slightly to release it from the retainers
and remove it
3. unscrew the screws securing the rear feet to the
cabinet;
4. remove the 3 mm shim from the feet and refit them;
screw in the front feet to obtain the required height.
Note
Hole provided in the top hinges enable the appliance
to be secured to the kitchen worktop by means of two
screws.
Important
For the appliance to function properly, an
opening of at least 137 cm
kitchen worktop (see fig.).
A minimum clearance must also be provided
between the,condenser and the wall, as
shown in the figure.
2 must be cut in the
51