Table of Contents
Advertisement
UPPER
SUPER.
E
D319
Fasten the appliance to the worktop or the sides,
applying the sealing strip between the appliance and
adjacent cabinet using the fixing brackets (E).
The appliance is equipped with adjustable support
feet. To adapt the appliance to the height of the
installation area (max 870 mm), screw in, or screw
out the feet situated in the four bottom corners.
Separate parts Ha, Hb, Hc, Hd as shown in the figure.
LOWER
INFER.
E
Place guide (Ha) on the inside part of the furniture
door, up and down as shown in the figure and mark
the position of external holes. Having drilled the holes,
fix the guide with the screws supplied.
Fix cover (Hc) on guide (Ha) until it clips into place.
Open the appliance door and the furniture door at
90°. Insert the small square (Hb) into guide (Ha). Put
together the appliance door and the furniture door
and mark the holes as indicated in the figure.
12
8mm
Advertisement
Table of Contents
