Changing The Carbon Filter; Defrosting; To Change The Light Bulb - Electrolux ENB 40400 X User Manual

Hide thumbs Also See for ENB 40400 X:
Table of Contents

Advertisement

20 electrolux

Changing the Carbon Filter

To maintain the best performance the
carbon filter should be changed every
year.
New carbon filters can be purchased
from your local dealer.
1. Pull the flap outwards. (1)
2. Remove the filter from the plastic bag.
3. Replace the filter in the slot found in
the back of the flap cover (2).
4. Close the flap cover.
Note: the carbon filter is a consumable
accessory and as such is not covered by
the guarantee.
During operation, always keep the
air ventilation flap closed.
The filter should be handled
carefully so fragments do not
loosen from the surface.

Defrosting

Defrosting is automatic in this model.

To Change the Light Bulb

Should the light fail to work you can
change it as below:
Break the circuit of the appliance.
GB
Press the rear hook (1) of the lampcover
by a screwdriver and at the same time
pull and rotate the cover in the direction
indicated by the arrow (2). So the bulb
can be replaced. (Bulb type: T25 230-
240 V, 25 W, E 14 thread)
After changing the bulb replace the
cover, snap it in place and apply voltage
to the appliance.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Enb 40400 w

Table of Contents