Acer HOMEPLUG User Manual page 10

Network– This tab will show all HomePlug devices connected to the network. Scan the
network for newly added devices.
MacAddress– The device ID or MacAddress is displayed on the tab to identify the unit.
Data Rate– Shows the speed that this device is connected at. This data will vary
depending on the Powerline quality.
Security– Allows the user to change the encryption setting on the HomePlug device.
Set Local– Enter the password into the Network Password Box and click on Set Local.
This will change the password to the local device only. Only devices
attached to the unit will have the new Password.
* The Password is Case sensitive. This password must be the same on all
HomePlug devices.
-10-