Table of Contents
Advertisement
20
USE
Control panel
ON
A
A. Pilot light (refrigerator)
B. Thermostat knob (refrigerator)
Cleaning the interior
Before using the appliance for the first time, wash
the interior and all internal accessories with luke-
warm water and some neutral soap so as to remove
the typical smell of a brand-new product, then dry
thoroughly.
USE OF THE FRIDGE
Operation
Insert the power supply plug into the nearest wall
socket.
Turn the thermostat knob (B) to the right to a
medium setting.
The pilot light (A) will light up.
To turn off the refrigerator, turn the thermostat knob
to the «
» position.
O
Fresh food refrigeration
To obtain the best performance:
•
do not store warm food or evaporating liquids in
the refrigerator;
•
do cover or wrap the food, particularly if it has a
strong flavour.
•
Position food so that air can circulate freely round it.
MAX
min
B
Do not use detergents or abrasive
powders, as these will damage the finish.
Temperature regulation
The temperature is automatically regulated and can
be increased to achieve a higher temperature
(warmer) by rotating the thermostat knob toward
min. settings or reduced (colder) rotating the knob
towards max. settings.
However, the exact setting should be chosen
keeping in mind that the temperature inside the
refrigerator depends on:
•
room temperature;
•
how often the door is opened;
•
the quantity of food stored;
•
location of appliance.
A medium setting is generally the most suitable.
Important
If the ambient temperature is high or the
appliance is fully loaded, and the appliance is
set to the lowest temperatures, it may run
continuously causing frost to form on the rear
wall. In this case the dial must be set to a higher
temperature to allow automatic defrosting and
therefore reduced energy consumption.
25
Advertisement
Table of Contents
