Table of Contents
Advertisement
INSTALLATION
Location
The appliance should be installed well away from
sources of heat such as radiators, boilers, direct
sunlight etc. For safety reasons, minimum ventilation
must be as shown in Fig.
Appliance positioned under overhanging kitchen wall
units (see Fig. A).
D338
A
B
Appliance positioned without overhanging kitchen
wall units (see Fig. B).
Attention: keep ventilation openings clear of
obstruction.
NP00
Two adjustable feet at the cabinet base allow
accurate levelling of the appliance.
Shelf holders
A
Your appliance is equipped with shelf retainers that
make it possible to secure the shelves during
transportation.
To remove them proceed as follows:
Move the shelf retainers in the direction of the arrow,
B
raise the shelf from the rear and push it forward until
it is freed and remove the retainers.
C
Rear spacers
In the bag with the documentation, there are two
spacers which must be fitted in the two top
corners.
Slacken the screws and insert the spacer under the
screw head, then re-tighten the screws.
D594
30
15
Advertisement
Table of Contents
