Configuring the Display normal messages option
Use this option to control whether normal messages are displayed
immediately upon receipt (option set to On) or not (option set to Off).
To configure the
steps:
4. Highlight the required value for the option.
5. Press the
6. Press the
to the idle display.
Display
normal message option, perform the following
1. Open the
in
Accessing the Message settings menu
(page
108).
2. Highlight the
3. Press the
Messaging
Select
soft key.
Clr
key one or more times to return
Message Settings
Display
option.
Select
soft key.
menu as shown
111