Getting Started; Turning The Phone On And Off; Lock/Unlock Your Phone; Make A Call - NEC G955 Reference Manual

Business mobility (ip) dect
Hide thumbs Also See for G955:
Table of Contents

Advertisement

Getting Started

Turning the phone on and off:

Press and hold the Red phone key for a few seconds.

Lock/Unlock your phone:

In Idle mode, press the OK key and then press the Lock softkey. To unlock, press the OK key and then press the Unlock softkey.

Make a call:

In Idle mode, type the number you want to dial and then press the Green phone key.

Answer a call:

Press the Green phone key.

End a call:

Press the Red phone key.

Reject a call:

Press the Reject softkey.
Make an inquiry call (also known as a broker's call):
During a call, press the Green phone key and dial the number of the party with whom you want to talk. You can toggle between
the two parties by pressing the Green phone key.
To transfer the first call to the inquiry call party, press the Red phone key.

Change the volume:

During a call, press the volume up or volume down buttons on the side of the phone.

Use the speakerphone:

During a call, press the Skp on softkey. To deactivate, press the Spk off softkey.

Mute a call:

During a call, press the Mute softkey. To turn the microphone on again, press the Unmute softkey.

Listen to voicemail messages:

In Idle mode, press the Menu softkey. Choose Messaging, Inbox and select Listen to voicemail. Scroll to the required
message and press the Select softkey.
Note: You may need to enter your voicemail number first.
Write a text message:
In Idle mode, press the Menu softkey. Choose Messaging and then New and draft. Enter your text.

Make a shortcut:

In Idle mode, press the Menu softkey. Choose Settings, General and select Shortcuts. Assign a function to one of the
navigational keys.
Make a speed dial key:
In Idle mode, press the Menu softkey and choose Contacts. Select the contact you want to assign and press the More softkey.
Choose Speed dial and press OK.
Scroll to the speed dial key number you want to assign and press the Add/Replace softkey. (If a number has already been
assigned to the selected key, it will be replaced.)
G955 Reference Guide
2

Advertisement

Table of Contents
loading

Table of Contents