Configuring The Led Signal (I755 Only) - NEC G355 User Manual

Telephone settings

Configuring the LED signal (I755 only)

The I755 DECT Handset has a three colored LEDs (red, green and
orange). The LEDs are used to indicate certain conditions to the user:
Missed call
Text message
Voice message
Text or voice message
Mandown
Low battery
The user can assign one of the above to each of the three LEDs (or use
Off if no condition is required for that LED).
To configure the LED settings, perform the following steps:
144
8. Press the Clr
to the idle display.
1. Open the General settings menu as shown in
Accessing the General settings menu (page
134).
2. Highlight the
3. Press the Select
key one or more times to return
LED signal option.
soft key.