Software Upgrade - Samsung LE55C User Manual

Software Upgrade

- When there are two or more BMP images, they are displayed on the screen using a
slideshow.
- It is recommended that the playback interval between two BMP images in the slideshow
should be one second. The image extraction probability will decrease with other playback
intervals.
- A BMP image might not be extracted if it is covered by another image (for example, the mouse
pointer).
Advanced Settings
Advanced Settings
Temperature
Auto Power : Off
: 해제
버튼 잠금
Upgrade is completed.
사용자 자동 색상 조정
Power will be off and turned on automatically.
: 자동설정
대기 모드 설정
OK
휘도 조정 기능
OSD Display
Software Upgrade
Move Enter
- The displayed image may differ depending on the model.
Return
Performs a software upgrade.
1
Connect the product to a computer via a digital signal such as DVI or HDMI. Click the BMP image file converted from an
SW code. The image below will appear on the screen of the product.
2
While a BMP image onto which the software code has been converted is displayed on the screen, select
Upgrade.
3
If a more recent version than the current software version is detected, you will be asked whether to upgrade the current
software. If you select Yes, the upgrade is performed.
4
When the software upgrade is completed, the product is turned off and on automatically.
― This only operates with a digital signal, such as in DVI, HDMI1, or
the panel resolution.)
― In
HDMI1 HDMI2
and modes, the timing values used for both the PC and TV are only supported if the
PC or DVI PC.
― This is only supported if the
Size is set to 16:9.
Software
HDMI2
mode. (The input resolution must be identical to
Edit Name
is set to
96