Table of Contents
Advertisement
Connection Using an IR Stereo Cable
(sold separately)
Turn off the device before connecting the External Sensor Kit. After it is connected,
turn on the device.
Controlling more than one display product using
your remote control
• Connect the IR OUT port on the product to the CONTROL IN port on the
other display product using the dedicated stereo cable.
• A command sent from the remote control pointed at product
1
received by both display products
― The appearance may differ depending on the product.
Controlling more than one display product using an
external sensor kit (sold separately)
• A command sent from the remote control pointed at product
which the external sensor kit is connected) will be received by both display
1
2
products
and
.
― The appearance may differ depending on the product.
1
will be
2
and
.
1
(to
1
IR OUT
POWER
IR OUT
SOURCE
CONTROL IN
2
CONTROL IN
1
CONTROL IN
2
23
Advertisement
Table of Contents
