Source Autoswitch Settings; Source Autoswitch; Primary Source Recovery - Samsung LE55C User Manual

Source AutoSwitch Settings

Source AutoSwitch

Source AutoSwitch Settings Source AutoSwitch Settings
Source AutoSwitch

Primary Source Recovery

Primary Source
: DVI
Secondary Source
: PC
Move Enter
- The displayed image may differ depending on the model.
Source AutoSwitch Settings is disabled if PIP is set to On.
-
Primary Source Recovery
Source AutoSwitch Settings
Source AutoSwitch Settings
Source AutoSwitch
Primary Source Recovery
Primary Source :
Secondary Source
: PC
Move Enter
- The displayed image may differ depending on the model.
: On
Off
On
: On
Return
: On
: On Off
On
Return
When the Source AutoSwitch is On, the display video source will automatically be searched for active video.
Primary Source
The selection will be activated, if the current video source is not recognized.
Secondary Source selection will become active, if no primary video source is available. If the primary or secondary source is
not recognized, the display will search again, if no active video is found the display will show the no-input-signal message.
When the Primary Source selection is set to All, the display will search all the video source inputs twice in sequence looking
for an active video source, returning back to the first video source in the sequence if no video is found.
Off On
• /
―
Source AutoSwitch selection and PIP function: If the
work, the Source AutoSwitch selection must be set to Off, for the
― When the
Source AutoSwitch selection is On, and or the
becomes inactive.
― When
Primary Source Recovery is On, only the
are interchangeable and selectable at will. Refer to
When Primary Source Recovery is On, only the
searched for active video.
Primary Source
The will be selected if active video is found, if no video is found, the
video is found in Secondary Source again, the no-input-signal is displayed.
Off On
/
•
Source AutoSwitch selection is set to On, the
PIP feature to work.
Primary Source Recovery is On, the display power saving mode
Primary Source Secondary Source
and
PIP > Source for compatible signals for each primary input source.
Primary Source and Secondary Source video source selection will be
Secondary Source
PIP function will not
selection are available and they
will be selected, if no
58