DCA-125USJ — OUTPUT TERMINAL PANEL FAMILIARIZATION
Output Terminal Panel
The Output Terminal Panel (Figure 8) shown below is located
on the right-hand side (left from control panel) of the generator.
Lift up on the cover to gain access to receptacles and terminal
lugs.
NOTE
PAGE 24 — DCA-125USJ — OPERATION AND PARTS MANUAL — REV. #2 (01/27/11)
Terminal legs "O" and "Ground" are
considered bonded grounds .
Figure 8. Output Terminal Panel
Output Terminal Familiarization
The " Output Terminal Panel " (Figure 8) is provided with the
following:
Three (3) 120/240V output receptacles @ 50 amp
Three (3) Circuit Breakers @ 50 amps
Two (2) 120V GFCI receptacles @ 20 amp
Two (2) GFCI Circuit Breakers @ 20 amps
Five (5) Output Terminal Lugs ( U, V, W, O, Ground)
Need help?
Do you have a question about the DCA125USJ and is the answer not in the manual?
Questions and answers