Power Management Setup - MSI MS-6534 User Manual

Chapter 4

Power Management Setup

(C)1999 American Megatrends, Inc. All Rights Reserved
IPCA Function
ACPI Standby State
USB Wakeup From S3
Mouse Wakeup From S3
Keyboard Wakeup From S3
Specific Key for Wakeup
Power Management/APM
Sleep State LED
Suspend Time Out (Minute)
FDC/LPT/COM Ports
Primary Master IDE
Primary Slave IDE
Secondary Master IDE
Secondary Slave IDE
Power Button Function
Wake Up On Ring
Wake Up On LAN
Wake Up On PME
Resume By RTC Alarm
RTC Alarm Date
IPCA Function
This item is to activate the ACPI (Advanced Configuration and Power
Management Interface) Function. If your operating system is ACPI-aware,
such as Windows 98SE/2000/ME, select Yes. Settings: Yes and No.
ACPI Standby State
This item specifies the power saving modes for ACPI function. Options are:
S1/POS
S3/STR
AMIBIOS SETUP - POWER MANAGEMENT SETUP
:Yes
:S1/POS
:Disabled
:Disabled
:Disabled
:N/A
:Enabled
:Blinking
:Disabled
:Monitor
:Monitor
:Ignore
:Monitor
:Ignore
:Suspend
:Enabled
:Disabled
:Enabled
:Disabled
:15
The S1 sleep mode is a low power state. In this state,
no system context is lost (CPU or chipset) and hard-
ware maintains all system context.
The S3 sleep mode is a lower power state where the
information of system cofiguration and open applica-
tions/files is saved to main memory that remains
powered while most other hardware components turn
off to save energy. The information stored in memory
will be used to restore the system when an "wake up"
event occurs.
RTC Alarm Hour
RTC Alarm Minute
RTC Alarm Second
Power Again
ESC : Quit
F1 : Help
F5 : Old Values
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
4-14
:12
:30
:30
:Last State
: Select Item
PU/PD/+/- : Modify
(Shift)F2 : Color