Using The Phone; Making A Call; Answering A Call - Geemarc T300 User Manual

USING THE PHONE

1 - MAKING A CALL

From the keypad :
- Dial the phone number you want to call, you can press the key to
cancel an incorrect entry.
- Press the , the number is automatically dialled.
- On completion of the call simply press the again to release the line or
put the handset on the base.
You may first press the key then dial your number but the key
will be without effect .
From stored caller numbers :
Only if you subscrided to the "Caller ID" service
Your telephone saves the 10 last numbers of incoming calls . When the
memory is full , the oldest number is replaced by the latest .
- Press the key
- Use the or key to select the wanted number ( or the name ), if
you
press you can see also the date/time of his call .
- Press the key , the number is dialed
You may exit before dialing : press key

2 - ANSWERING A CALL

When an incoming call is received proceed by:
- Press the key to take the line and speak.
- On completion of the call simply press the again to release the line
or put the handset on the base.
Caller ID display
If you subscrided to the "Caller ID" service, the caller number or name will be
displayed.
If you see ******** symbols, that means your caller doesn't want to be identified
14