Abit KD7A User Manual page 54

3-20
[Last State]: When power returns after an AC power failure, the system will return to the state where you
left off before power failure occurs. If the system's power is off when AC power failure occurs, it will
remain off when power returns. If the system's power is on when AC power failure occurs, the system
will power-on when power returns.
IRQ/Event Activity Detect:
Click <Enter> key to enter its submenu:
Power On Function:
Four options are available: Hot Key
Only. This iten allow you to choose the computer power turn on method you like. Some item you choose,
some of the following items will be available to let you making further setting. For instance, when you set
this item to Password, the item of "KB Power On Password" will allow you to enter password. When
you set this item to Hot Key, the item of "Hot Key Power On" will allow you to choose the hot key you
want. If you choose Mouse, you can press any key on mouse to turn on the computer power.
NOTE: To enable this "Power On" function, the wake-up header of [PS2-PWR1], [USB-PWR1],
[USB-PWR2] must be set to [Enabled] position. Please refer to the configuration of "Wake-up Header"
[PS2-PWR1], [USB-PWR1], and [USB-PWR2] in section 2-4, chapter 2.
The mouse wake up function can only be used with the PS/2 mouse, not with the COM port or USB type.
Some PS/2 mice cannot wake up the system because of compatible problems. If the specs of your
keyboard are too old, it may fail to power on.
KB Power On Password:
When you perss the <Enter> key, then you can enter the password you want. When set be done, you need
to saving and leave the BIOS setting menu to reboot your computer system. Next time when you
shutdown your computer, you can't use the power button to turn on the computer power anymore.
You need to press the password to turn on your computer power.
Hot Key Power On:
Fifteen options are available: Ctrl+F1 ~ Ctrl+F12, Power, Wake and Any Key. The default setting is
Ctrl+F1. You can choose the hot key that you want it to turn on your computer power.
PS2MS Wakeup:
This item controls the PS2 mouse to wake up the system that has been powered down.
KD7A
Password Mouse Button Only. The default setting is Button
Chapter 3