Abit SG-72 User Manual page 51

BIOS Setup 3-13
PM Wakeup Events:
Click <Enter> key to enter its submenu:
Wakeup by Ring:
An input signal on the serial Ring Indicator (RI) line (in other words, an incoming call on the modem)
awakens the system from a soft off state.
Wakeup by PME# of PCI:
This item specifies whether the system will be awakened from power saving modes when activity or input
signal of the specified hardware peripheral or component is detected.
USB Resume from S3:
This option allows you to specify whether the system will be awakened from power saving modes when
activity or input signal of the specified hardware peripheral or component is detected.
PS2KB Wakeup from S3:
This option allows you to set hot key combination to turn on the system by keyboard.
PS2MS Wakeup from S3:
This option allows you to set the mouse action to turn on the system.
Wakeup by Alarm:
When set to Enabled, the following three fields become available: Month Alarm, Day of Month Alarm,
and Time Alarm Upon arrival of the alarm time, it will instruct the system to wake up.
When set to 0 (zero) for the day of the month, the alarm will power on your system every day at the
specified time.
User's Manual