2-14
(12). Front Panel Audio Connection Header
When using computer cases with audio connectors at front panel, you can change the Line-Out and
Mic-In connectors from rear edge I/O port array to the front edge I/O port array for easier access.
•
To use the audio connector at front panel, remove all the jumpers on this header, and then connect
to front panel by the extension cable provided with the chassis.
•
To use the audio connector at rear panel, disconnect the extension cable, attach the jumpers back at
pin 5-6, and pin 9-10 (default setting).
SG-72
Pin
Pin Assignment
1
Audio Mic.
3
Audio Mic. Bias
Speaker Out Right
5
Channel
7
X
Speaker Out Left
9
Channel
Pin
Pin Assignment
2
Ground
4
VCC
Speaker Out Right
6
Channel Return
8
NC
Speaker Out Left
10
Channel Return
Chapter 2