Installing Drivers With Existing Windows Nt - Abit BE6-II User Manual

D-12

Installing drivers with existing Windows NT:

If there is an existing NT 4.0 file system, you can install the Ultra ATA/66 into the existing
system by following procedure:
BE6-II
Appendix D
Step 1: Open "Control Panel", and then
enter "SCSI Adapters".
Step 2: Select "Drivers", and then click
"Add..."
Step 3: Click "Have Disk..."
Step 4: Insert the Ultra ATA/66 driver disk
into drive A, and then click "OK."