Load Fail-Safe Defaults; Load Optimized Defaults; Set Password; Save & Exit Setup - Abit SV-1A User Manual

3-24 Chapter 3
[Cleared]: Clear the warning message in the monitor.
Warning Beep:
After setting the [Case-Open Detection] item to [Enabled] or [Cleared], this item
selects the chassis beeper to activate or not when the chassis intrusion device
connected to the "C.O." of header "FPIO1" is activated.
All Voltages, Fans Speed and Thermal Monitoring:
These unchangeable items list the current status of the CPU and environment
temperatures, fan speeds, and system power voltage.
NOTE: The hardware monitoring features for temperatures, fans and voltages will
occupy the I/O address from 294H to 297H. If you have a network adapter, sound
card or other add-on cards that might use those I/O addresses, please adjust your
add-on card I/O address to avoid using these addresses.

3.8. Load Fail-Safe Defaults

This option loads the BIOS default values for the most stable, minimal-performance
system operations.

3.9. Load Optimized Defaults

This option loads the BIOS default values that are factory settings for
optimal-performance system operations.

3.10. Set Password

This option protects the BIOS configuration or restricts access to the computer itself.
3.11. Save & Exit Setup
This option saves your selections and exits the BIOS setup menu.

3.12. Exit Without Saving

This option exits the BIOS setup menu without saving any change.
SV-1A