Abit SV-1A User Manual page 49

BIOS Setup
Active Temp. Point:
This item selects the point of active temperature for FANEQ option.
Active DC Level:
This item selects the 1
AUXFAN1/AUXFAN4 EQ Control:
This item selects to enable or disable the FANEQ option for headers AUXFAN1 and
AUXFAN4.
FAN Fail Alarm Selectable
This item selects the fan that will be monitored for malfunction.
Active Temp. Point:
This item selects the point of active temperature for FANEQ option.
Active DC Level:
This item selects the 1
Back to PC Health Status Setup Menu:
Shutdown Temperature:
This item sets the temperature that would shutdown the system automatically in order
to prevent system overheats.
CPU Warning Temperature:
This item selects the CPU's warning temperature limit. Once the system has detected
that the CPU's temperature exceeded the limit, warning beeps will sound.
NOTE: The onboard hardware monitor function is capable of detecting these system
health conditions. If you want a warning message to pop-up or a warning alarm to
sound when an abnormal condition occurs, you must install the "Hardware Doctor"
utility. This utility is included in the "Driver & Utility CD" that came packed with this
motherboard.
Case-Open Detection
This option controls the action to take when the chassis intrusion device connected to
header JP1 is activated.
[Disabled]: Disable the case-open warning.
[Enabled]: Enable the case-open warning.
st nd rd
, 2 and 3 DC level for FANEQ option.
st nd rd
, 2 and 3 DC level for FANEQ option.
3-23
User's Manual