Abit SV-1A User Manual page 43

BIOS Setup
Wake-Up by Ring:
When set to [Enabled], telephone calls coming through an external or internal modem
will power-on your system.
WakeUp by Alarm:
When set to [Enabled], you can set the date and time you would like the Soft-Off PC
to power-on in the "Date (of Month) Alarm" and "Time (hh:mm:ss) Alarm" items.
However, if the system is being accessed by incoming calls or the network (Resume
On Ring/LAN) prior to the date and time set in these items, the system will give
priority to the incoming calls or network instead.
Date (of Month) Alarm
[0]: This option power-on the system everyday according to the time set in the "Time
(hh:mm:ss) Alarm" item.
[1-31]: This option selects a date you would like the system to power-on. The system
will power-on on the date set, and the time set in the "Time (hh:mm:ss) Alarm" item.
Resume Time (hh:mm:ss)
This item sets the time you would like the system to power-on.
POWER ON Function:
This item selects the way you want your system to power on.
[Password]: Use a password to power on the system, select this option then press
<Enter>. Enter your password. You can enter up to 5 characters. Type in exactly the
same password to confirm, and then press <Enter>.
[Hot KEY]: Use any of the function keys between <F1> to <F12> to power on the
system.
[Mouse Left]: Double click the mouse left button to power on the system.
[Mouse Right]: Double click the mouse right button to power on the system.
[Any KEY]: Use any keyboard keys to power on the system.
[BUTTON ONLY]: Use only the power button to power on the system.
[Keyboard 98]: Use the power-on button on the "Keyboard 98" compatible keyboard
to power on the system.
NOTE: To enable this "Power On" function, the wake-up header of [USB-PWR1]
must be set to [Enabled] position. Please refer to the configuration of "Wake-up
Header" [USB-PWR1] in section 2-4, chapter 2.
3-17
User's Manual