Table of Contents
Advertisement
3-14
Chapter 3
SuperIO Device:
Click <Enter> key to enter its submenu:
Onboard FDD Controller:
This option enables or disables the onboard FDC controller.
Onboard Serial Port 1 / Onboard Serial Port 2:
This item determines which I/O addresses the onboard Serial Port controller will
access.
[Auto]: The system automatically select an I/O address for the onboard Serial Port.
[3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3]: Allows you to manually select an
I/O address for the onboard Serial Port.
[Disabled]: Disables the onboard Serial Port.
Onboard Parallel Port:
This item specifies the I/O address used by the parallel port.
[Disabled]: This option prevents the parallel port from accessing any system
resources. When the value of this option is set to [Disabled], the printer port becomes
unavailable.
[378/IRQ7]: This option allows the parallel port to use [378/IRQ7] as its I/O port
address. The majority of parallel ports on computer systems use IRQ7 and I/O Port
378H as the standard setting.
SV-1A
Advertisement
Table of Contents
