Geemarc Petite Trac User Manual page 2

SETTING UP
FIT A 9 VOLT PP3 BATTERY
Why? Because if you have a power cut or disconnect your Petite Trac for
any reason you won't have to re-set the clock.
- Remove the battery cover underneath the telephone.
- Fit the battery, ensuring that the correct polarity is observed.
- Replace the battery cover.
NOTE: Battery back-up is not designed to support the clock operation for
lengthy periods in the absence of mains supply. It is recommended that the
battery be changed every 6 months or earlier if necessary.
IMPORTANT: Dispose of batteries carefully. Never burn them or let
children play with them.
CONNECTING TELEPHONE
- Connect the handset cord.
- Connect the PTT line cord to the telephone.
- Connect the PTT plug to the wall socket (classified TNV-3 according to
EN60950 standard).
- Connect the AC adaptor plug into the socket at the rear of the base unit.
- Connect the AC adaptor to the wall socket (classified "hazardous voltage"
according to EN60950 standard).