Clear Memory; Control Alarm Mode; Wait Display - Philips SM30 User Manual

14.7.14 CLEARING MEMORY
14.1 Main menu selection
Select from the main menu by means of the
left/right arrow keys: CLEAR MEMORY
14.2 Confirmation
Since this is a potentially hazardous program
(it will erase all programming) after pressing
ENTER the display will show: ARE YOU
SURE ?
PRESS < TO CLEAR
Only the left arrow key will proceed with
clearing; any other key will return to the
main menu without clearing the memory.
14
SELECT PROGRAM :

CLEAR MEMORY

1
2
ARE YOU SURE ?
PRESS < TO CLEAR
3
CLEARING MEMORY
PLEASE WAIT
4
POWER - ON - DELAY
5
MEMO RY CLEARED
SYSTEM IS DOWN
Clear Memory
14.3

Wait display

After pressing the ENTER key, the display
will show that clearing memory is in
advance.
14.4 Power-on delay
14.5 System down
When the memory is cleared the display will
show that the SM30 system is down. The
installer programming password must be re-
entered, and the setup program run, in
order to continue.
14.7.15 ALARM MODE
Alarm signals activated by a control input
can be interrupted by a Call Station with
higher priority. When the overruling call
ends, the alarm signal will return and
continue till the end of the signal.
15.1 Main menu selection
Select from the main menu by means of the
left/right arrow keys: CTL ALARM MODE
SELECT PROGRAM :
CTL ALARM MODE
1
2
CT L ALA RM MODE
NON - INTERRUPT
3
CTL ALARM MODE
INTERRUPTABLE

Control Alarm Mode

10