Advertisement
PART NAMES AND FUNCTIONS (Continued)
Back and bottom
(With the video board)
1 OFF/STD-BY
switch
OFF
:The power indicator lamp goes off, and the power can't be turned on by the power button. The power is partly supplied.
STD-BY
:The power indicator lamp lights red, and the power can be turned on or off by the power button.
2 RS-232C terminal (RS-232C)
This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.
When connecting a cable, attach a ferrite core to the cable. (See P. E-2.)
3 RGB1 input terminal (RGB1 INPUT/mD-sub)
Connect this terminal to the PC's display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.
4 Power input terminal
Connect this terminal to the power cable supplied with the display.
When connecting a cable, attach a ferrite core to the cable. (See P. E-2)
E-4
Advertisement
