Channel; Mode; Fine Tune; Scan - Sharp AQUOS LC-26GA5E Operation Manual

Menu operations

✔ CHANNEL

Menu Operation: SETUP Group B (page 19)
Item
CHANNEL: Real Channel Number (See the table
in SYSTEM on page 19.)
NOTE
• Receivable channels depending on TV norm (Band,
System, etc.), installation site, and range.

✔ MODE

Menu Operation: SETUP Group B (page 19)
This feature allows you to set the programmes to "TV",
"VCR" or "SKIP" mode.
Item
TV: If the TV signal is weak the image can shake. In
this case put it in TV mode.
VCR: In some cases, the upper part of the picture
may be distorted when receiving signal from a
VCR via RF terminal on the TV set. Selecting this
option will help to reduce this effect.
SKIP: Allows you to SKIP programmes you do not
want to view when using P (r/s). (Use
Programme Select (0–9) or Programmes list (a/
b) to display these channels)

✔ FINE TUNE

Menu Operation: SETUP Group B (page 19)
When a preset programme channel is not exactly
tuned, you can fine-tune the channel in this mode.
NOTE
• Press and hold c/d, until the best tuning position is found,
for the best picture and sound, and then press OK to
memorise.

✔ SCAN

Menu Operation: SETUP Group B (page 19)
Press c/d to "SCAN" between the existing channel
and the previous or next one.
• The tuning sequence will stop when a signal is
detected.
• If the signal is not the required channel, press c/d
to continue searching.
• If the signal is the required channel, press OK to
memorise.
Item c Button
SCAN It searches the
following channel
downward
20
E
In this menu you can change the order of the channels,
delete channels, and change or give the channels an
eight-letter name.
Button
c/d
a/b
Red
Yellow
Blue
END
"EDIT" Mode (Change of Name)
NOTE
• The position of the cursor will appear on screen in a yellow
background.
• Letters A to Z of the alphabet, a blank space and the
numbers 0 to 9 will appear sequentially.
"DELETE" Mode (Deleting channels)
NOTE
• When you delete a channel, the channels that follow it on
the list will automatically rearrange themselves by moving
up one programme (Pr) place, to restore the space of the
cancelled channel.
"SORT" Mode (Sorting channels)
d Button
It searches the
following channel
NOTE
upward
• When you change of site a channel, the located channels
next are rearranged. By such reason, it is advisable to
order the channels, being begun by which you wish to
place in the first position (Pr1).

EDIT

Available options in EDIT menu screen
Mode
TV or RADIO
SELECT
EDIT
DELETE
SORT
EXIT
1 Press a/b to change the letters, and press c/d
for changing the position of the cursor.
2 Press OK to "STORE" the name.
3 Press END to exit.
1 Press OK to delete the channel selected on the
list.
2 Press END to exit.
1 Press a/b to move the channel to the required
position (Pr).
2 Press OK to "STORE".
Description
To select the
programmes of "TV" or
"RADIO".
To select a programme
from the list.
Use this mode for giving
a name made up of
eight-letter to the
channels or for changing
the one which appears
on some channels.
Use this mode for
cancelling channels
which are badly tuned or
repeated.
Use this mode for
sorting the channels into
the desired programme
(Pr).
To return to the normal
screen.