Watching Tv; Turning On The Power; Turning Off The Power; Standby/On - Sharp AQUOS LC-26GA5E Operation Manual

Watching TV

Turning on the power

Press a a a a a (Power) on the TV.
• The Standby/On indicator on the TV changes from
red to green.

Turning off the power

To turn off the power, press a a a a a (Power) on the TV
again.
• The Standby/On indicator on the TV gradually turns
off.
• When the TV is turned off by a a a a a (Power), you cannot
turn on the power by pressing B on the remote
control.
NOTE
• If you are not going to use this TV for a long period of
time, be sure to remove the AC cord from the power outlet.
• Weak electric power is still consumed even when a a a a a
(Power) is turned off.

Standby/On

Press B on the remote control.
• The TV enters Standby/On mode and the image on
the screen disappears.
• The Standby/On indicator on the TV changes from
green to red.

Initial auto installation

When the TV powers on for the first time after purchase,
the initial auto installation is invoked. You can set
language, country and automatically search for and
store all the receivable TV and FM radio channels.
NOTE
• The initial auto installation functions only once. If the Initial
auto installation is not completed, (ex: When menu screen
disappeared by not operating for a few minutes, when
the power shut down, etc.), try "AUTO INSTALLATION"
from the "SETUP" menu. (See page 19.)
1
Setting the on-screen display language
1 Press a/b to select "SELECT LANGUAGE".
2 Press c/d to select the desired language listed
on the screen.
2
Setting the country or area
1 Press a/b to select "SELECT COUNTRY".
2 Press c/d to select your country or area listed on
the screen.
NOTE
• The TV set is ready to preset automatically all local
channels for you.
• If you do not intend to use your TV set with a VCR then
proceed to step 3.
• If the TV set is being used with a VCR, turn on the VCR
and play back a pre-recorded tape. The signal from the
RF terminal of your VCR is assigned to a TV programme.
3
Press OK to start Auto Channel Preset.
• Automatic Channel Sorting System (ACSS):
The TV searches for frequencies, memorises the
channels found, and sorts them (according to
technical criteria).
For TV channels: from Pr-01 to a maximum of 99
programmes.
For FM RADIO channels: from Pr-01 to a maximum
of 40 programmes.
• This tuning process may take several minutes to
perform.
• You do not need to do anything during the Auto
Channel Preset.
4
When the Auto Channel Preset has been
completed, the "EDIT" menu screen is displayed.
• In this menu you can change the order of the
channels, delete channels, and change or give the
channels an eight-letter name.
Available options in EDIT Menu screen
Button Mode
TV or RADIO
c/d
SELECT
a/b
Red EDIT
Yellow DELETE
Blue SORT
END EXIT
• For more details about "EDIT" menu screen, see
page 20.
Watching TV
The setup menu disappears and you can watch the
programme.
Description
To select the
programmes of "TV" or
"RADIO".
To select a programme
from the list.
Use this mode for giving
a name made up of
eight-letter to the
channels or for changing
the one which appears
on some channels.
Use this mode for
cancelling channels
which are badly tuned or
repeated.
Use this mode for
sorting the channels into
the desired programme
(Pr).
To return to the normal
screen.
7