Installation - Electrolux EHL4 User Manual

Hide thumbs Also See for EHL4:
Table of Contents

Advertisement

Problem
Steam and condensation settle
on the food and in the oven
cavity
The display shows "12.00"
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

INSTALLATION

Warning! Refer to "Safety information"
chapter.
The handle can be replaced to match
the décor of your kitchen. The change
must be done by an authorized person.
Use only genuine replacement parts.
INSTALLING THE OVEN UNDER A
WORK SURFACE
Warning! Installation into flammable
material must agree with NIN 2005,
chapter 4.2.2 of the VKF (Association
of Cantonal Fire Insurers) fire protection
guidelines and regulations.
Possible cause
You left the dish in the oven for
too long
A power cut
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the appliance cavity.
1. Install the hotplates according to the in-
2. Install the glass ceramic cooking sur-
3. Pull the appliance drawer out as far as
Do not leave the dishes in the
oven for longer than 15-20 mi-
nutes after the cooking process
ends
Reset the clock
.........................................
.........................................
.........................................
stallation instruction no.374307900/
374307901 so that the hotplate socket
connections can be carried out before
the cooker is inserted. Make sure the
correct socket connections are
used.
A separate earthing is not required.
A = appliance
N = recess
face and hobs according to the sepa-
rate installation instructions.
it goes, take hold of it and remove it.
electrolux 21
Remedy

Advertisement

Table of Contents
loading

Table of Contents