Electrolux EHS 36020 U User Manual page 31

4. Screw / clip fixing plates / retaining
grips into the appropriate holes in the
protective boxes.
5. Place first appliance in the cut-out.
Lay connecting cross bar in the cut-
out and push up halfway against the
appliance.
6. Put silicon on the appliance corners
that will touch one another. Put sili-
con on the end of the cross bar.
7. Loosely screw in fixing plates / re-
taining grips from below on the
worktop and on the connecting
cross bar.
installing more than one frontline hob electrolux 31