After Use - Electrolux EHI 331 X Instruction Book

After use

Daily cleaning is done with a well
wrungout cloth.
Extra dirty surfaces can be cleaned by
using a plastic sponge with a normal
cleaning product.
After cleaning, the hotplates should be
switched on for a moment until they
are fully dry.
Clean between the bright metal ring
and the hot-plate extra carefully.
If you use hot-plate covers, both these
and the hot-plates should be
completely dry before the covers are
replaced.
Cleaning of the hot plates
Remove solidified food or other
spillage from the plates as soon as
possible. A dirty plate reduces the heat
transmission between the plate and the
cooking utensils.
1. For normal maintenance, wipe the
plates with a damp sponge or cloth.
If necessary add some detergent to
the water. Subsequently dry the
plates by short heat-up.
2. Remove heavily burnt-in spillage
with a glass-ceramic scraper, by
using the flat blade. Then clean the
area with liquid cleaner (ATA,
VISS, AJAX, VIM). Rinse the plate
with clear water. Dry the plate as
described at item 1.
3. Spillage or stains that remains after
the described cleaning (item 1 and
2) can be burnt-off. Clean one plate
at a time.
3a. Switch on the plate to maximum
heat for 6-8 minutes. For safety
reasons only do this when the
plate is under control.
3b. Let the plate cool off.
Afterwards wipe off the plate
with a damp cloth.
If you use hot-plate covers, both these
and the hot-plates should be
completely dry before the covers are
replaced.