Table of Contents
Advertisement
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabi-
net.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to
Remove the lower door.
Remove the ventilation grille which is fixed
by two screws.
Carefully put the appliance to its rear side,
totally unscrew the adjustable foot and
screw it in the opposite side.
Remove the bottom hinge by unscrewing its
fixing screws.
Using a 12 mm spanner, unscrew the hinge
pin and reassemble it on the opposite side
of the hinge.
Install the lower hinge in the opposite side,
using the screws previously removed.
Carefully put the appliance in its working po-
sition and adjust the level of the appliance
by screwing / unscrewing the adjustable feet
at the bottom of the cabinet using your fin-
gers or a tool.
Slide the hole cover out of the ventilation
grille by pushing it in the direction of the ar-
row and reassemble it on the opposite side.
Install the ventilation grille, fixing the screws.
Install the lower door.
Install the middle hinge (H) in the opposite
side.
Install the upper door.
In your documentation bag you will find the
upper hinge necessary to make the reversi-
bility. Put the hinge in position and screw it.
Remove the covers and the handles and fix
them on the opposite side.
Insert the plastic plugs into the hole left
open.
the cabinet. In that case, wait for the nat-
ural fitting of the gasket.
In case you do not want to carry out the
above mentioned operations, contact the
nearest After Sales Service Force. The Af-
ter Sales Service specialist will carry out
the reversibility of the doors at your cost.
ENGLISH
15
Advertisement
Table of Contents
