Table of Contents
Advertisement
14 www.electrolux.com
6.4 Rear spacers
6.5 Door reversibility
WARNING!
Before carrying out any opera-
tions, remove the plug from the
power socket.
To change the opening direction of the door,
do these steps:
Remove the upper hinge taking care for the
upper door not to fall off and keep it for fu-
ture actions.
Remove the upper door.
Remove the upper support and install it in
the opposite side.
Unscrew the middle hinge (H). Remove the
plastic plugs located on the opposite side of
H
the central hinge and install them in the
holes occupied before by the hinge.
Inside the appliance you find two
spacers which must be fitted as
shown in the figure.
Slacken the screws and insert the spacer
under the screw head, then retighten the
screws.
To carry out the following opera-
tions, we suggest that this be
made with another person that will
keep a firm hold on the doors of
the appliance during the opera-
tions.
Advertisement
Table of Contents
