Table of Contents
Advertisement
Do not use a steel wool pad; it will scratch
Stainless
the surface.
steel
To clean the stainless steel surface, use warm
sudsy water, a stainless steel cleaner such as
Kleen King
cleaner. Always wash in the direction of the
grain. Rinse thoroughly with a sponge or cloth
and clean water. Dry with a soft, clean cloth.
Light bulbs
The bulbs are located on the underside of the hood.
To change the light bulbs:
1. Remove the trim ring by turning it
2. Grasp the bulb on the edges and remove by
3. Replace with the same type and size bulb.
These 120 volt, 50 watt, par 16 halogen flood
bulbs, with standard base, are available at specialty
lighting stores.
These bulbs can also be ordered from your
GE supplier.
Order bulb no. WB08X10028.
The warming lamps are located on the
Warming
underside of the hood.
lamps
These 120 volt, 175 watt, par 38 infrared heat
lamp bulbs, with standard base, are available at
some specialty lighting stores.
These infrared bulbs can also be ordered from
your GE supplier.
Order bulb no. WB08X10029.
8
®
, or an all-purpose liquid or spray
counterclockwise.
turning it counterclockwise.
Care and Cleaning
Professional Range Hood
After cleaning, use a stainless steel polish, such
as Stainless Steel Magic
®
, Revere Copper and
Stainless Steel Cleaner
®
or Wenol All Purpose
Metal Polish
®
. Follow the product instructions
for cleaning the stainless steel surface.
NOTE: If warming lamps are not desired,
additional cooktop lighting can be obtained
by replacing the infrared bulbs with standard
incandescent bulbs with up to 100 watt
maximum ratings, with standard bases. These
bulbs are available at specialty lighting stores.
Advertisement
Table of Contents
