Advertisement
ZV30RSFSS – GE Monogram 30" Stainless Steel Professional Hood
Using Duct Cover Accessories
To avoid unsightly gaps, plan the hood installation height for duct covers
use. Use the following formula to calculate the need for one of more
duct covers and to ensure a trouble free installation.
Ceiling Height
B
A
C
A - B = C
12"
8 ft. ceilings: When the hood is installed 32"
above the cooking surface and there is no
soffit or upper cabinetry, order one 12" and
one 6" duct cover accessory.
Specification Created 10/02
10" Hood
Height
INSTALLATION EXAMPLES
32"
9 ft. ceilings: When the hood is installed 38"
above the cooking surface, order two 12" duct
cover accessories.
We recommend that the vent hood and decorative duct cover (if used)
be on site before final framing and wall finishing. This will help to
accurately locate studs, ductwork and electrical service.
• Read these examples carefully to determine the need for one or more
6" or 12" duct covers.
A = Countertop to ceiling height.
B = Gap at the top of the hood to the ceiling.
C = Hood installation height – Plus 10" hood height.
NOTE: Dia. C should be between 40" and 46" (for a 30" to 36" installa-
tion height). Raise or lower the hood installation height to allow use of
one or more 6" and 12" duct covers.
24"
38"
10 ft. ceilings: When the hood is installed 36"
above the cooking surface, order three 12" and
one 6" duct cover accessories.
For answers to your Monogram,
GE appliance questions, visit our website at
Listed by
Underwriters
GEAppliances.com or call
Laboratories
R
GE Answer Center
42"
32"
®
GE Profile
™
or
service, 800.626.2000.
®
Advertisement
