Route Planning - Becker GPS Navigator Operating Manual

Route planning

The route planning menu allows you to
create and select individual routes. To do
this, enter the individual destination
points for the desired route. It is then
possible to travel to these points
consecutively without having to enter
any further information. You can also
optimise the destination points entered
and in so doing change their order.
> In the main menu, press the button
New destination
.
> Press the
Route planning
In the route menu you can create a new
route by pressing the Create new route
button. Previously stored routes are
shown in a list below this.
Note:
If no routes have yet been stored, the
route menu is empty.
Scrolling through stored routes
> Press the arrow keys
use the scroll wheel on the right of the
screen to scroll through the stored
routes.
Editing stored routes
You can add additional stages to a stored
button.
route, change the name of the route or
delete it.
> Press the
route you wish to edit.
By pressing
a stage to the route.
After pressing
give the route a new name.
Pressing
delete the route from the stored routes.
Selecting and starting a route
> Press a route to select it.
The route is loaded and displayed in the
stage menu.
or
> Press the top button.
Note:
You can also select a leg of the route.
button in front of the
The route is started as of this leg.
NAVIGATION MODE
Add stage
you can now add
Rename route you can
Delete route
will allow you to
>>>
> D
> GB
> F
> I
> PL
59