Control Panel; Before Use; Using Fridge; To Start The Fridge And Set The Correct Temperature - Electrolux ER8317C Instruction Booklet

Control Panel

1. Green indicator lamp
Lights when the fridge is operating.

Before use

Position and clean the cabinet as explained in the
section "Installation".
Check that the drain hose at the rear of the cabinet
discharges into the drip tray.
Before inserting the power plug into the
outlet and switching on the cabinet for
the first time, leave it standing upright
for about 30 minutes, or for 4 hours if it
was transported horizontally. Otherwise
the compressor may sustain damage.
This time will allow the oil sufficient
time to return to the compressor.

Using fridge

To start the fridge and set the
correct temperature
Turn the thermostat control to the desired position.
MIN
The lowest position of the thermostat control results
in the highest temperature inside the cabinet.
MAX
The highest position of the thermostat control results
in the lowest temperature inside the cabinet.
H :
Switched off.
Allow the cabinet to run for a period of 24 hours
whenever the temperature setting is changed. This
will allow the temperature to stabilise inside the
cabinet.
A B
2. Thermostat control
Use to switch on and set the desired temperature in
the fridge.
5
GB
Electrolux 818 15 91- -01/0
GB