Table of Contents
Advertisement
TECHNICAL & CONSUMER INFORMATION
Problems That May Affect Emissions
If you are aware of any of the following symptoms, have your engine
inspected and repaired by your servicing dealer.
Hard starting or stalling after starting.
Rough idle.
Misfiring or backfiring under load.
Afterburning (backfiring).
Black exhaust smoke or high fuel consumption.
Replacement Parts
The emission control systems on your Honda engine were
designed,
built, and certified
to
conform with
EPA
and California emission
regulations. We recommend the use
of genuine Honda parts
whenever you have maintenance done. These original-design
replacement parts
are manufactured to the same standards
as the
original parts, so you can be confident of their performance. The use
of replacement parts that are not of the original design and quality
may impair the effectiveness of your emission control system.
A manufacturer of an aftermarket part assumes the responsibility that
the part
will not adversely affect emission performance. The
manufacturer or rebuilder of the part must certify that use of the part
will not result
in a failure of the engine to comply
with emission
regulations.
Maintenance
Follow the maintenance schedule on page
21. Remember that this
schedule is based on the assumption that your machine will be used
for its designed purpose. Sustained high-load or high-temperature
operation, or use in unusually wet or dusty conditions,
will require
more frequent service.
45
Hide quick links:
Advertisement
Table of Contents
