Abit BD7-E User Manual page 44

3-10
[Auto]: The BIOS will select the best available option after checking your hard drive or CD-ROM.
[Disabled]: The BIOS will not detect these categories. If problem arises in using Ultra DMA devices, try
disabling this item.
OnChip IDE-2 Controller:
The description is same as the OnChip IDE-1 Controller.
USB Controller:
This option enables or disables the USB controller.
USB Keyboard Support Via:
This item allows you to select [BIOS] for using USB keyboard in DOS environment, or [OS] in OS
environment.
USB Mouse Support Via:
This item allows you to select [BIOS] for using USB mouse in DOS environment, or [OS] in OS
environment.
OnChip Audio Controller:
This option enables or disables the audio controller.
Init Display First:
Two options are available: PCI Slot and AGP. The default setting is PCI Slot. When you install an
additional display card, you can choose either a PCI display card or an AGP display card to activate the
display boot-up screen.
IDE HDD Block Mode:
This item determines to use the Block Mode for IDE HDD.
[Enabled]: The IDE HDD supports block mode.
[Disabled]: The IDE HDD supports standard mode.
Onboard LAN Controller:
This option enables or disables the LAN controller.
Onboard LAN Boot ROM:
This item allows you to use the boot ROM (instead of a disk drive) to boot-up the system and access the
local area network directly.
POWER ON Function:
This item selects the way you want your system to power on.
[Password]: Use a password to power on the system, select this option then press <Enter>. Enter your
password. You can enter up to 5 characters. Type in exactly the same password to confirm, and then press
<Enter>.
BD7-E
Chapter 3