GE MONOGRAM ZCG3300 WW Installation Instructions Manual page 15

Procedure D (continued)
• Turn the panel over, appearance side up. Use
wood blocks to support the inner door and prevent
damage to the hinge and lock tabs.
• Drill pilot holes through the front of the custom
panel and through the metal panel to match the
chosen handles.
• Secure handle to wood panel with screws (not
supplied).
• Replace drawer front to the drawer by re-installing
the hinge pins. Swing door against drawer and
secure with side clasp.
• Slowly push the drawer closed and check alignment
of the panel.
Installation
Built-In Compactors
15