Advertisement
TRI I'OD SCREEN
, STRUCTURE
-07-
PULLING ROD
I
BLACK BORDER
,
SCREEN
~=======T======~~
it:!,;-
TRIPOD (E TYPE).
•
•
•
•
•
•
2 INSTALLING
Choose a suitable place for installing, open the tripod feet first, pull
out the upper bar to a suitable height and lock it, hang the pulling rod
above to the goose neck and adjust the screen height, then finally fix/lock
it at a satisfied position which you want. After using, release the screen
and put it back to the housing.
3 USEFUL INSTRUCTIONS
a. The tripod legs should be placed steady.
b. When adjusting the height of screen should be move the upper bar
slowly and carefully.
4.WARNINGS
8.
The screen can not be folded. Do not use fingers or hard objects
to touch the screen surface. Do not splash the milk, fruit juice or other
chemical doses to the screen surface. Keep the screen far away from
the high temperature objects or fire.
b. If the screen is dirty wash the screen gently by a broom or a cotton
ball,do not use the organic solvents to clean the screen surface.
c. When pulling the screen down, must be slowly and vertical. Do
not pull it roughly. Please stop pulling as soon as the black border is out
or the screen is jammed or injured, then send the screen to the
maintenance center.
d.After using, put the screen back to the housing in order to avoid
being polluted.lf not using it for a long time, please take the screen from
the wall and pack it in a carton.
Advertisement
