Advertisement
-06-
WALL-MOUNTED MANUAL SCREEN
I.STRUCTURE
HOUSING
RING
t
BLACK BORDER
SCREEN
PULLING RING
I
\
PULLING ROD
2.INSTAWNG
Moving Parts afthe drive must be installed higher than 2,5 mm above
above the floor or other level that could provide access to it. Choose a
suitable place for installing.it is best to install two screws onthe wall,
the distance aftha screwsust be equal to that of the two rings and they
should be at the same level, the rings must be strong enough to loading
more than 25kg weights.
3 USEFUL INSRTUCTIONS
Hold the pulling ring tightly and pull down the screen slowly. then stop
when the black border comes Qut(or stop pulling where you want to
stop), the screen can
be
auto-fIXed,
if
it can not
be
fixed, please operate
it once again according to the same method. After using.release the
screen and it will go up and back to the housing.
4.WARNINGS
a The screen can not be folded.Do not use fingers or hard objects
to touch the screen surface.Do not splash the milk, fruit juice or other
chemical doses to the screen surface. Keep the screen far away from
the high temperature objects orfire.
b If the screen is dirty wash the screen gently by a broom or a cotton
ball do not use the organic solvents to clean the screen surface.
c When pulling the screen down, must be slowly and vertical. Do
not pull it roughly, please stop pulling as soon as the black border is out
or the screen is jammed or injured, then send the screen to the
maintenance center.
d After using, put the screen back to the housing in order to avoid
being polluted, If not using it for a long time,please take the screen from
the wall and pack it in a carton.
Advertisement
